What about abnormal heat dissipation during the use of high-speed centrifuge? Is IT product quality or improper use? Next let's get to know this problem.
1. The high-speed centrifuge operates under overload, which makes the ER larger, the rated power larger than the actual power, and the excess part turns into heat dissipation, which makes the centrifuge components overheat.
2. The power of high-speed centrifuge is too high, but the actual power required is so large that the excess part will be lost and converted into electric energy.
3. High-speed centrifuge installation or start-up device problems, centrifuge start-up energy consumption conversion rate is low. If the centrifuge is set too fast or the starting device is out of order, the centrifuge can be overheated when the power is too high, but the energy consumption conversion rate is low. Overheating of centrifuge components will greatly shorten the service life of centrifuge components. The causes of centrifuge failure should be found out and dealt with in time. Or contact the centrifuge manufacturer to provide technical support for centrifuge fault treatment.
News
Contact Us
Dongguan Yicheng Electromechanical Co., Ltd.
Contact: Liu Sheng
Address: No. 133, Dongpu New Village, Yangwu, Dalingshan Town, Dongguan City
Contact: Liu Sheng
Phone: 15099913797
Technical support: 13189713016
Website: http://kaglobal.cn
Address: No. 133, Dongpu New Village, Yangwu, Dalingshan Town, Dongguan City
Reasons for Abnormal Heat Dissipation of High Speed Centrifuge
時(shí)間:2019/5/27 9:15:09